Lorex Technology H.264 Manuel d'utilisateur télécharger pdf (Page 46)

32

Using the Main Menu

• Record Mode: Select one of the following:

z Single-Way: The system

stops recording when the internal

hard drive is full.

z Overwrite: The system

continues recording when the

internal hard drive is full by

overwriting the oldest recorded

data.

z No Record: The system

does

not

record.

3. To exit, right-click until you return to the

main screen.

8/16-channel

NOTE: As you make changes to the recording

parameters, the storage calculator at the

bottom of the menu displays the time remaining

on the hard drive.

To configure record settings:

1. From the Main Menu, click . The

Record menu opens.

2. Configure the following:

• Video Information: View video quality

statistics

• Record Mode: Click to select one of the

following:

z Single-Way: The system

stops recording when the internal

hard drive is full.

z Overwrite: The system

continues recording when the

internal hard drive is full by

overwriting the oldest recorded

data.

z No Record: The system

does

not

record.

• Video Frame Rate: Set the frame rates for

alarm/motion, working hour, and

non-working hour:

z Alarm/Motion Rate: Click under

each camera and select X, 2, 3, 5,

7.5, 10, or 15 (fps).

z Working Hour Rate: Click under

each camera and select 0, 2, 3, 5,

7.5, 10, or 15 (fps).

z Non-working Hour Rate: Click

under each camera and select 0, 2,

3, 5, 7.5, 10, or 15 (fps).

z Real Rate: The system will

automatically calculate and

allocate a

Real Rate

when you

change the Working Rate.

Figure 12.3 Record menu (8/16-channel)

Figure 12.4 Frame Rate menu (8/16-channel only)

Figure 12.5 Frame rates for NTSC and PAL

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 129 130

Commentaires sur ces manuels

Pas de commentaire